View A080SN03-V0_6675289.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

customer approval sheet company name model a080sn03 v0 customer approved title : name : approval for specifications only (spec. ver. ) approval for specifications and es sample (spec. ver. ) approval for specifications and cs sample (spec. ver. ) customer remark : auo pm : p/n : comment : www.datasheet.co.kr datasheet pdf - http://www..net/
all rights strictly reserved. any portion of this pa per shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. doc. version : 0.4 total pages : 32 date : 2010/01/25 product specification 8" color tft-lcd module model name a080sn03 v0 planned lifetime: from 2010/jan to 2011/jan phase-out control: from 2010/july to 2011/dec eol schedule: 2011/jan < >preliminary specification < >final specification note: the content of this specification is subject to change. ? 2009 au optronics all rights reserved, do not copy. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 1/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. record of revision version revise date page content 0.0 2009/11/25 all first draft. 0.1 2010/01/07 p3 modify panel power consumption p4,5 modify drawing p6 modify pin description p10 modify dc charateristics & current consumptio n p11 add gamma voltage & vcom buffer p16 modify serial interface setting table p18 modify power on/off characteristics p19 modify optical specification 0.2 2010/01/13 p3 modify overall dimension & weight p4,5 modify drawing 0.3 2010/01/15 p3 revise backlight power consumption p11,12,19 revise led lightbar current/ power consumption 0.4 2010/01/25 p9 add input signal voltage p10 revise vcom p27 add application circuit www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 2/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. contents a. general information................................ ................................................... .................................................. 3 b. outline dimension .................................. ................................................... .................................................. 4 1. tft-lcd module C front view..................... ................................................... ............................................ 4 2. tft-lcd module C rear view ...................... ................................................... ........................................... 5 c. electrical specifications .......................... ................................................... ................................................ 6 1. tft lcd panel pin assignment .................... ................................................... .......................................... 6 2. backlight pin assignment ......................... ................................................... ................................................ 8 3. absolute maximum ratings........................ ................................................... .............................................. 8 4. electrical dc characteristics...................... ................................................... ............................................ 10 5. electrical ac characteristics ...................... ................................................... ............................................ 13 6. serial interface characteristics .................. ................................................... ............................................ 15 7. power on/off characteristics..................... ................................................... ............................................ 18 d. optical specification .............................. ................................................... ................................................ 19 e. reliability test items ............................. ................................................... ................................................. 22 f. packing and marking ................................ ................................................... .............................................. 25 1. packing form ...................................... ................................................... ................................................... 25 2. module/panel label information .................. ................................................... .......................................... 26 3. carton label information........................ ................................................... ................................................ 26 g. application note ................................... ................................................... .................................................. 2 7 1. application circuit .............................. ................................................... ................................................... .. 27 2. cabc function block ............................... ................................................... ............................................... 31 h. precautions ........................................ ................................................... ................................................... .. 32 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 3/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. a. general information this product is for portable dvd and digital photo f rame application. no. item unit specification remark 1 screen size inch 8(diagonal) 2 display resolution dot 800(w)x600rgb(h) 3 overall dimension mm 183(w)x141(h)x4.9(d) note 1 4 active area mm 162(w)x121.5(h) 5 pixel pitch mm 0.2025(w)x0.2025(h) 6 color configuration -- tri-gate note 2 7 color depth -- 16.2m colors note 3 8 ntsc ratio % 50 9 display mode -- normally white 10 panel surface treatment -- anti-glare, 3h 11 weight g 225 10 12 panel power consumption mw 189 note 4 13 backlight power consumption w 1.58 14 viewing direction 6 oclock (gray inversion) note 1: not include blacklight cable and fpc. refer next page to get further information. note 2: below figure shows dot stripe arrangement. note 3: the full color display depends on 24-bit dat a signal (pin 33~40, 42~49, 51~58). note 4: please refer to electrical characteristics chapter. . . ( 1 2 . .. ......................... 799 800 ) ( 1 ... ....1800 ) b g r b g r b g r b g r b g r b g r b g r b g r www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 4/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transforme d to any other forms without permission from au optronics corp. b. outline dimension 1. tft-lcd module C front view www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 5/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transforme d to any other forms without permission from au optronics corp. 2. tft-lcd module C rear view www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 6/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission fr om au optronics corp. c. electrical specifications 1. tft lcd panel pin assignment recommended connector : xf2m-6015-1ah no. symbol i/o description remark 1 vcom i common electrode driving voltage 2 vgl p negative power supply voltage for gate driver 3 vgh p positive power supply voltage for gate driver 4 vgh p positive power supply voltage for gate driver 5 vdpa p positive power supply voltage for analog pow er 6 vdna p negative power supply voltage for analog pow er 7 gnd p ground 8 drv_blu o cabc pwm_signal output via an output buffer 9 cabc_en i cabc function enable 10 u/d i up/down selection. note2 11 r/l i left/right selection note2 12 grb i h/w global reset note1 13 v10 i gamma correction voltage reference 14 v9 i gamma correction voltage reference 15 v8 i gamma correction voltage reference 16 v7 i gamma correction voltage reference 17 v6 i gamma correction voltage reference 18 v5 i gamma correction voltage reference 19 v4 i gamma correction voltage reference 20 v3 i gamma correction voltage reference 21 v2 i gamma correction voltage reference 22 v1 i gamma correction voltage reference 23 vddio p digital interface supply voltage of digital 24 vddio p digital interface supply voltage of digital 25 cs i chip select (low active) of spi 26 sda i/o data input/output of spi 27 scl i clock input of spi 28 gnd p ground 29 dclk i data clock input 30 gnd p ground 31 de i data enable input (high active) 32 gnd p ground 33 db7 i blue data input (msb) 34 db6 i blue data input www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 7/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission fr om au optronics corp. 35 db5 i blue data input 36 db4 i blue data input 37 db3 i blue data input 38 db2 i blue data input 39 db1 i blue data input 40 db0 i blue data input (lsb) 41 gnd p ground 42 dg7 i green data input (msb) 43 dg6 i green data input 44 dg5 i green data input 45 dg4 i green data input 46 dg3 i green data input 47 dg2 i green data input 48 dg1 i green data input 49 dg0 i green data input (lsb) 50 gnd p ground 51 dr7 i red data input (msb) 52 dr6 i red data input 53 dr5 i red data input 54 dr4 i red data input 55 dr3 i red data input 56 dr2 i red data input 57 dr1 i red data input 58 dr0 i red data input (lsb) 59 gnd p ground 60 vcom i common electrode driving voltage i: input; p: power note1: global reset, normally pulled high. suggest to connecting with an rc (r=10k ohm, c=1uf)reset cir cuit for stability. normally pull high. note2: u/d direction l/r direction h d u h r l l u d l l r www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 8/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission fr om au optronics corp. 2. backlight pin assignment recommended connector : h201k-p02n-02b (molex 51021 -0200 compatible) no. symbol i/o description remark 1 hi i power supply for backlight unit (high voltage ) 2 gnd - ground for backlight unit 3. absolute maximum ratings item symbol condition min. max. unit remark vddio gnd=0 -0.5 5 v vdpa gnd=0 -0.5 5.9 v vdna gnd=0 -5.9 0.5 v vgh gnd=0 vdpa -- v vgl gnd=0 -- vdna v power voltage vgh vgl - 32 v u d r l u/d= l u/d=h l/r=h l/r=l pin1 pin60 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 9/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission fr om au optronics corp. vi gnd=0 -0.3 vddio+0.3 v note 1 vcom gnd=0 -3.5 0 v v1~v5 gnd=0 0 vdpa-0.2 v input signal voltage v6~v10 gnd=0 vdna+0.2 0 v operating temperature topa storage temperature tstg note 1: de, digital data. note 2: functional operation should be restricted un der ambient temperature (25 ). note 3: maximum ratings are those values beyond whi ch damages to the device may occur. functional operation should be restricted to the limits in the electrical characteristics chapter. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 10/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission fr om au optronics corp. 4. electrical dc characteristics a. dc charateristics item symbol min. typ. max. unit remark vddio 3 3.3 3.6 v vdpa tbd 5 5.5 v vdna -5.5 -5 tbd v vgh 14 v power supply vgl -14 v vcom vcdc -1.6 -1.9 -2.2 v h level vih 0.7xvddio -- vddio v input signal voltage l level vil 0 -- 0.3xvddio v note 1 pull-up/down impedance rin -- 800k -- input level of v1~v5 vx gnd -- vdpa-0.2 v note 2 input level of v6~v10 vx vdna+0.2 -- gnd v note 2 note 1: de, digital data note 2 : vdpa > v1 > v2 > v3 > v4 > v5 > v6 > v7 > v8 > v9 > v10 > vdna b. current consumption (agnd=gnd=0v) parameter symbol condition min. typ. max. unit remark input current for vddio ivddio vddio=3.3v - 6.45 7 ma note 1 input current forvdpa ivdpa vdpa=5v - 5.58 12.9 ma note 1 input current for vdna ivdna vdna=-5v - -5.68 -13.4 ma note 1 input current for vgh ivgh vgh=14v - 3.96 5 ma note 1 inpur current for vgl ivgl vgl=-14v - -4.04 -5 ma note 1 input leakage current iin digital input pins - - 1 ua note 2 note 1: the test pattern use the following pattern. note 2: except for pull-up, pull-down pins. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 11/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission fr om au optronics corp. c. gamma voltage suggested circuit is as follows v1 4.296v v2 2.929v v3 2.358v v4 2.012v v5 1.003v v6 -1v v7 -1.958v v8 -2.35v v9 -2.853v v10 -4.3v d. vcom buffer suggested circuit is as follows 3 4 2 5 1 + - u1 c1 10uf/16v/x7r/1206 r1 3k r2 1.3k c2 10uf/16v/x7r/1206 c3 100nf/16v/x7r/0603 vdna vdna vcom e. backlight driving conditions parameter symbol min. typ. max. unit remark led lightbar current i l - 150 - ma note 1, 2 power consumption p 1.58 1.68 w led lightbar life time 10,000 - - hr note 1, 2, 3, 4 note 1: led backlight is led lightbar type(18 pcs of led). note 2: definition of led lifetime: brightness is decreased to 50% of the initial value. led lifetime is restricted under normal condition, ambient temperature = 25 and led lightbar current= 150ma www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 12/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission fr om au optronics corp. note 3: the value is only for reference. note 4: if it operates with led lightbar voltage mo re than 150ma, it maybe decreases led lifetime. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 13/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission fr om au optronics corp. 5. electrical ac characteristics a. signal ac characteristics parameter symbol min. typ. max. unit. remark clock high time twcl 8 -- -- ns clock low time twch 8 -- -- ns data setup time tdsu 5 -- -- ns data hold time tdhd 10 -- -- ns data enable set-up time tesu 4 -- -- ns b. input timing setting horizontal timing: parameter symbol min. typ. max. unit. remark dclk frequency fdclk 36.7 40 45.1 mhz dclk period tdclk 22 25 27 ns hsync period (= thd + thbl) th 986 1056 1183 dclk active area thd -- 800 -- dclk horizontal blanking thbl 186 256 383 dclk www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 14/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission fr om au optronics corp. horizontal input timing vertical timing: parameter symbol min. typ. max. unit. remark vsync period (= tvd + tvbl) tv 620 628 635 th active lines tvd -- 600 -- th vertical blanking tvbl 20 28 35 th vertical timing www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 15/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission fr om au optronics corp. 6. serial interface characteristics a. serial control interface ac characteristic parameter symbol min. typ. max. unit. remark serial clock tsck 320 -- -- ns scl pulse duty tscw 40% 50% 60% tsck serial data setup time tisu 120 -- -- ns serial data hold time tihd 120 -- -- ns serial clock high/low tssw 120 -- -- ns csb setup time tcsu 120 -- -- ns csb hold time tchd 120 -- -- ns delay from csb to vsync tcv 1 -- -- us chip select distinguish tcd 1 -- -- us ac serial interface write mode timings b. register bank a totally 16-bit register includeing 7-bit address d[15:9], 1-bit read bit d[8], and 8-bit data d[7:0] can be set via 3-wire serial peripheral interface. beflow figure is for a detail description of the parameters. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 16/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission fr om au optronics corp. figure. serial interface read sequence (1) each serial command consists of 16bits of data wh ich is loaded one bit a time at the rising edge of serial slock scl. (2) command loading operation starts from the falli ng edge of cs and is completed at the next rising e dge of cs. (3) the serial control block is operational after powe r on reset, but commands are established by the foll owing rising edge of end frame. if command is transferred multiple times for the same resgister, the last command befo re the following rising edge of the end frame is valid, ex cept for some special registers (ex. grb, etc.). (3) if less the 16 bits of scl are input while cs is low, the transferred data is ignored. the read ope ration interrupt. (4) if 16 bits or more of scl are input while cs is low, the first 16 bits of transferred data in the d uration of cs=l are valid data. (5) serial block operates with the scl clock (6) serial data can be accepted in the standy(power s ave) mode. (7) it is suggested that de, dclk always exists in t he same time. (8) when grb is activated through the serial interface , all register are cleared, except the grb value. (9) the register setting values are rewritten by th e influence of static electricity, a noise, etc. to uns uitable value, incorrect operating may occur. it is suggested that the spi interface will setup as frequently as possible. c. serial interface setting table. address r data reg d15 d14 d13 d12 d11 d10 d9 d8 d7 d6 d5 d4 d3 d2 d1 d0 r0 0 0 0 0 0 0 0 0 -- -- -- -- -- -- 0 1 r1 0 0 0 0 0 0 1 0 -- -- -- -- 00 00 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 17/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission fr om au optronics corp. d. register description r0 setting address bit discription default 7 - 2 -- auo internal use 000111 1 stb standby mode setting 0 000000 0 grb s/w global reset 1 bit 1 stb 0 nomal operation (default) 1 standby mode. register data are kept. bit 0 grb 0 s/w global reset. reset all register to default va lue. h/w grb has higher priority. 1 normal operation. (default) r1 settings address bit discription default 7 - 4 -- auo internal use 0000 3 - 2 chud vertical scan direction setting 00 000001 1 - 0 chlr horizontal scan direction setting 00 bit 3 - 2 chud 0x accoring to h/w pin u/d setting. (default) 10 vertical scan direction is from up to down. 11 vertical scan direction is from down to up. bit 1 - 0 chlr 0x accoring to h/w pin l/r setting. (default) 10 horizontal scan direction is from left to right. 11 horizontal scan direction is from right to left. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 18/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission fr om au optronics corp. 7. power on/off characteristics a. recommended power on sequence t1 > 0us; t2 R 10us ; t3 R 0us ; t4 > 0us ; t5 > 0us b. power off sequence www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 19/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. d. optical specification all optical specification is measured under typical co ndition (note 1, 2) item symbol condition min. typ. max. unit remark response time rise fall tr tf =0 -- - - 12 18 24 36 ms ms note 3 contrast ratio cr at optimized viewing angle 400 500 -- note 4 top bottom left viewing angle right cr R 10 40 50 60 60 60 65 70 70 deg. note 5 brightness y l v l = 12v 200 250 -- cd/m 2 note 6 x =0 0.26 0.31 0.36 white y =0 0.28 0.33 0.38 x =0 0.56 0.61 0.66 red y =0 0.30 0.35 0.40 x =0 0.27 0.32 0.37 green y =0 0.51 0.56 0.61 x =0 0.10 0.15 0.20 chromaticity blue y =0 0.07 0.12 0.17 uniformity y l % 70 75 -- % note 7 note 1 : to be measured in the dark room. ambient t emperature =25 , and led lightbar current i l = 150ma. note 2 :to be measured on the center area of panel with a viewing cone of 1 by topcon luminance meter bm-5a, after 15 minutes operation. center of the screen field=1 bm-5a www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 20/32 all rights strictly reserved. any portion of this p or transformed to any other forms without permission from au optronics corp. note 3: definition of response time: the output signals of photo detector are measured w hen the input signals are changed from black to white(falling time) and from white to black(rising time), respectively. the response time is defined as the time interval between the 10% and 90% of amplitudes. refer to figure as below. s i g n a l ( r e l a t i v e v a l u e ) "black" tr tf "white" "white" 0% 10% 90% 100% note 4.definition of contrast ratio: contrast ratio is calculated with the following for mula. status black" " at is lcd when output detector photo status white" " at is lcd when output detector photo (cr) ratio contrast = note 5. definition of viewing angle, , refer to figure as below. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 21/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. note 6. measured at the center area of the panel whe n all the input terminals of lcd panel are electric ally opened. note 7: luminance uniformity of these 9 points is d efined as below: 9) - (1 points 9 in luminance maximum 9) - (1 points 9 in luminance minimum uniformity = auo confidential for winaccord internal use only / 2010/2/9 www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 22/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. e. reliability test items no. test items conditions remark 1 high temperature storage t a = 7 0 240hrs 2 low temperature storage ta= -3 0 240hrs 3 high ttemperature operation tp = 6 0 240hrs 4 low temperature operation ta= -10 240hrs 5 high temperature & high humidity tp= 5 0 . 80% rh 240hrs operation 6 heat shock -1 0 ~ 6 0 , 100 cycle, 1hrs/cycle non-operation 7 electrostatic discharge contact = 4 kv, class b air = 8 kv, class b note 4 8 image sticking 25 , 4hrs note 5 frequency range : 10~55hz stoke : 1.5mm sweep : 10 ~ 55 ~ 10hz 2 hours for each direction of x,y,z 9 vibration (6 hours for total) non-operation jis c7021, a-10 condition a : 15 minutes 10 mechanical shock 100g . 6ms, x,y,z 3 times for each direction non-operation jis c7021, a-7 condition c 11 vibration (with carton) random vibration: 0.015g 2 /hz from 5~200hz C6db/octave from 200~500hz iec 68-34 12 drop (with carton) height: 60cm 1 corner, 3 edges, 6 surfaces 13 pressure 5kg, 5sec note 6 note 1: ta: ambient temperature. tp: panel surface temperature note 2: in the standard conditions, there is not dis play function ng issue occurred. all the cosmetic specification is judged before the reliability stres s. note 3: all the cosmetic specification is judged befor e the reliability stress. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 23/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. note4 : all test techniques follow iec6100-4-2 stan dard. test condition note pattern procedure and set-up contact discharge 330?, 150pf, 1sec, 8 point, 25times/point air discharge 330?, 150pf, 1sec, 8 point, 25times/point criteria b C some performance degradation allowed. no data lo st. self-recoverable hardware failure. others 1. gun to panel distance 2. no spi command, keep default register settings. note 5: operate with 5 5 chess board pattern as figure and lasting time an d temperature as the conditions. then judge with 50% gray level after wai ting 20 min, the mura is less than jnd 2.5. note 6: the panel is tested as figure. the jig is 10 mm made by cu with rubber and the loading speed is 3mm/min on position a~e. after the conditio n, no glass crack will be found and panel function check is ok.( no guarantee lc mura lc bubble) www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 24/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. loading lcm www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 25/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. f. packing and marking 1. packing form www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 26/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 2. module/panel label information the module/panel (collectively called as the product ) will be attached with a label of shipping number which represents the identification of the product at a specific location. refer to the product outline dra wing for detailed location and size of the label. the label i s composed of a 22-digit serial number and printed w ith code 39/128 with the following definition: 3. carton label information the packing carton will be attached with a carton lab el where packing qty, auo model name, auo part number, customer part number (optional) and a serie s of carton number in 13 or 14 digits are printed. the carton number is apparing in the following format: refer to the drawing of packing format for the locat ion and size of the carton label. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 27/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. g. application note 1. application circuit www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 28/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 29/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 30/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 31/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. 2. cabc function block tbd www.datasheet.co.kr datasheet pdf - http://www..net/
version: 0.4 page: 32/32 all rights strictly reserved. any portion of this p aper shall not be reproduced, copied, or transformed to any other forms without permission from au optronics corp. h. precautions 1. do not twist or bend the module and prevent the unsuitable external force for display module during assembly. 2. adopt measures for good heat radiation. be sure to use the module with in the specified temperature . 3. avoid dust or oil mist during assembly. 4. follow the correct power sequence while operating. do not apply the invalid signal, otherwise, it will cause improper shut down and damage the module. 5. less emi: it will be more safety and less noise. 6. please operate module in suitable temperature. t he response time & brightness will drift by differe nt temperature. 7. avoid to display the fixed pattern (exclude the white pattern) in a long period, otherwise, it will cause image sticking. 8. be sure to turn off the power when connecting or d isconnecting the circuit. 9. polarizer scratches easily, please handle it caref ully. 10. display surface never likes dirt or stains. 11. a dewdrop may lead to destruction. please wipe o ff any moisture before using module. 12. sudden temperature changes cause condensation, an d it will cause polarizer damaged. 13. high temperature and humidity may degrade perfo rmance. please do not expose the module to the dir ect sunlight and so on. 14. acetic acid or chlorine compounds are not friends with tft display module. 15. static electricity will damage the module, please do not touch the module without any grounded device . 16. do not disassemble and reassemble the module by self. 17. be careful do not touch the rear side directly. 18. no strong vibration or shock. it will cause module broken. 19. storage the modules in suitable environment wit h regular packing. 20. be careful of injury from a broken display module. 21. please avoid the pressure adding to the surface (front or rear side) of modules, because it will cau se the display non-uniformity or other function issue. www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of A080SN03-V0

	To Download A080SN03-V0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .